The armature torque of a DC motor running of 800rpm is 99.3Nm and shaft torque is 93.3Nm. The iron and friction losses are__.

Related MCQs

• A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and frictional losses amount of 600W, what is the armature torque?
• A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and frictional losses amount of 600W, what is the shaft torque?
• A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the armture torque?
• A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the lost torque?
• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the speed of the motor___.
• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the output power in H.P.
• The shaft torque in a DC motor is less than total armature torque because of ____in the motor
• The armature of a 4 pole shunt motor has a lap winding accomodated in 60 slots, each containing 20 conductors, if the useful flux per pole is 23mWb, the armature torque developed when the armature current is 50A is _____.
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A 6pole, 3-ph induction motor is runs at a speed of 960rpm & the shaft torque is 135.7Nm. Calculate the rotor cu loss if the friction and windage losses amount to 150W. The suppy freq is 50Hz.