A 8 pole ,50Hz ,3phase I.M ,If full load slip is 2.5%. Rotor speed is

Related MCQs

• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the maximum torque developed is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
• The rotor speed of a 6 pole 50Hz induction motor is 960 r.p.m. The percentage slip is ____.
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• For 3phase I.M,The synchronous speed of rotating magnetic field is 1000 rpm,speed of rotor is 960 rpm ,then slip is
• For 3phase I.M,the synchronous speed of rotating magnetic field is 1000 rpm,speed of rotor is 970 rpm ,then slip is
• For 3phase I.M,the synchronous speed of rotating magnetic field is 1500 rpm,speed of rotor is 1440 rpm ,then slip is