A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.

Related MCQs

• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
• A 50Hz 20 poles 3 phase I.M. has a full load slip 1.33%. Its rotor impedance per phase on standstill is 0.02+j0.3ohms. Then the ratio of starting torque to the maximum torque is____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the maximum torque developed is ___ Nm.
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• A 3 phase I.M. has rotor impedance on standstill as 0.8+j3.8Ω. Then the maximum torque will occur at slip of ____%