A6 pole 3 phase 50Hz induction motor develops mechanical power of 40Hp and has mechanical losses of 1500W at a speed of 960rpm when connected to 500V. The output available at the shaft is (Take 1HP=746W)

Related MCQs

• A 6pole, 3-ph induction motor is runs at a speed of 960rpm & the shaft torque is 135.7Nm. Calculate the rotor cu loss if the friction and windage losses amount to 150W. The suppy freq is 50Hz.
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the back emf?
• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the output power in H.P.
• A 4 pole, 440V, 50Hz induction motor is running at a slip of 4%. The speed of motor is ____.
• A 3 phase induction motor connected from a 3 pjhase, 50Hz AC supply runs at 720rpm and has slip 4%. The number of poles in motor are _____.
• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the speed of the motor___.
• A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.
• The rotor speed of a 6 pole 50Hz induction motor is 960 r.p.m. The percentage slip is ____.
• A 4 pole, 50Hz induction motor runs at a speed of 1440rpm. The frequency of the rotor induced emf is _____.