A 4 pole, 50Hz induction motor runs at a speed of 1440rpm. The frequency of the rotor induced emf is _____.

Related MCQs

• A 3-phase ,400 V, 4-pole induction motor is fed from a 3-phase, 400V, 50 Hz supply and runs at 1440 rpm. The frequency of rotor emf is
• The rotor speed of a 6 pole 50Hz induction motor is 960 r.p.m. The percentage slip is ____.
• A 6pole, 3-ph induction motor is runs at a speed of 960rpm & the shaft torque is 135.7Nm. Calculate the rotor cu loss if the friction and windage losses amount to 150W. The suppy freq is 50Hz.
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• A 4 pole, 440V, 50Hz induction motor is running at a slip of 4%. The speed of motor is ____.
• When load is connected to three phase induction motor is increased, then its rotor induced emf
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
• A6 pole 3 phase 50Hz induction motor develops mechanical power of 40Hp and has mechanical losses of 1500W at a speed of 960rpm when connected to 500V. The output available at the shaft is (Take 1HP=746W)
• A 3 phase induction motor connected from a 3 pjhase, 50Hz AC supply runs at 720rpm and has slip 4%. The number of poles in motor are _____.
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed