A 3 phase I.M. running with slip 5%. Its rotor input is 20kW then its power output is ____ if frictional losses are 1kW.

Related MCQs

• A 3 phase I.M. is running with 5% slip. Its rotor input is 20kW and its synchronous speed is 1500rpm then its shaft torque is ___ if frictional losses are 1kW.
• A 3 phase I.M. is running with 5% slip. Its rotor input is 20kW then its rotor efficiency is ____.
• A 25kW, 3 phase I.M. is running with 6% slip. Its rotor resistance per phase is____ if frictional losses are 850W and rotor current per phase is 65A.
• A 25kW, 3 phase I.M. is running with 6% slip. Its rotor copper losses are ____ if frictional losses are 850W.
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• An 8-pole , 50Hz,3-ph indduction motor running with a slip of 4% is taking 20KW. Stator losses amount 0.5KW. The total torque develped is
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.