Various methods for starting a three phase induction motor are given, which method will required six stator terminals

Related MCQs

• When three phase induction motor is started with star-delta starter, during starting stator is connected
• Two of the supply terminals to a 3-phase induction motor get interchanged during reconnection after normal maintenance. When switched on to supply, the motor will
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• When three phase induction motor is started with star-delta starter, during normal running condition, stator is connected
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• Condition for maximum torque developed during starting by a three phase induction motor is
• The air gap between the stator and rotor of a 3 phase induction motor ranges from
• The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The rotor cu loss per phase is (slip = 3%)
• The torque developed by three phase induction motor depends on following three factors
• The torque developed by a 3-phase induction motor during starting