[Solved] Consider that for a particular process, the p has shifted to .4 and the process has gone out of control. The corresponding value of beta is found to be .3356. The value of Average Run Length is:

Q.	Consider that for a particular process, the p has shifted to .4 and the process has gone out of control. The corresponding value of beta is found to be .3356. The value of Average Run Length is:
A.	2.5
B.	1.5 ((1/1-beta) provides us with average run length)
C.	1.0
D.	2.7
Answer» B. 1.5 ((1/1-beta) provides us with average run length)

4.9k

Do you find this helpful?

View all MCQs in

Total Quality Management (TQM)

Discussion

No comments yet

Related MCQs

Consider that for a process s bar (average standard deviation of 50 samples each of size 4) is found to be 10.04. The value of c4 (corresponding to sample size of .4) is .92. What is the estimated value of process standard deviation?
Consider for a process in control, the value of alpha is .0015. What is the value of the average run length?
A fan blade is specified by length and thickness. While sampling, it was found that for one particular blade, the length was non-conforming while the thickness was as per specifications. Should the blade be considered non-conforming for construction of a p chart?
The average run length can be defined as:
An acceptance control chart has limits that are based on the specification limits for the product rather than limits which differentiate between random and assignable causes. Under which if the following circumstance should a QC manager consider using an acceptance control chart?
The thickness of the blade of a fan is specified to lie between 4 cm and 6 cm. The length of the blades must lie between 10 cm and 20 cm. A fan blade randomly selected from a sample of 100 blades has a thickness of 5cm and a length of 21cm. The number of defect(s) the blade has is ______________.
Given that for the three samples, the value of R bar is .66 and value of d2 corresponding to three is1.128, what is the estimated standard deviation?
Control chart is i. Process monitoring tool ii. Process control tool iii. Process planning tool The correct order is
In the quality area, process control is becoming an important element of the manufacturing to rigorous specifications to provide a consistently uniform output. The control of a process is divided into controlling temperatures, pressures, flows, ______________, and levels in terms of rates and time.
Identify the charts which might give an indication of process going out of control (before the process has actually changed)