For a good condition, slip should be_              

Related MCQs

• If the slip is above 5 percent, the pumps needs to be             
• Slip in a pump depends on which of following parameters?
• A turbine works at 20 m head and speed of 500 rpm. Its 1:2 scale model to be tested at same head should have a rotational speed of
• A liquid flows with the same velocity through two pipes 1 and 2 having the same diameter. If the length of the second pipe be twice that of the first pipe, what should be the ratio of the head loss in the two pipes?
• A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water?
• For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal
• To obtain maximum hydraulic efficiency of pelton turbine, blade velocity should be                      Times the inlet velocity of jet.
• For an actual reaction turbine, what should be the angle beta, such that the loss of kinetic energy at the outlet is to be minimum?
• The desired hydraulic efficiency of a turbine is 80% at a whirl velocity of 20 m/s and a head of 100 m. What should be the blade velocity of the turbine at inlet in m/s?
• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?