[Solved] The desired hydraulic efficiency of a turbine is 80% at a whirl velocity of 20 m/s and a head of 100 m. What should be the blade velocity of the turbine at inlet in m/s?

Q.	The desired hydraulic efficiency of a turbine is 80% at a whirl velocity of 20 m/s and a head of 100 m. What should be the blade velocity of the turbine at inlet in m/s?
A.	40
B.	60
C.	80
D.	25
Answer» A. 40

945

Do you find this helpful?

View all MCQs in

Fluid Mechanics (FM)

Discussion

No comments yet

Related MCQs

The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.
The whirl velocity at inlet of Francis turbine is given to be 20 m/s. The blade velocity is given as 35 m/s. What is the hydraulic efficiency for a head of 100 m?
For a Kaplan turbine, the whirl velocity at inlet of the turbine is given to be 18 m/s. The blade velocity is given as 25 m/s. What is the hydraulic efficiency for a head of 50 m. Take g = 10 m/s2?
The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).
Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
The power available at the shaft of a Francis turbine is 1 MW. The volume flow rate of water in 25 m3/s, whirl velocity at inlet is 10 m/s and blade velocity is 5 m/s. Find the mechanical efficiency (in %)?
The power available at the shaft of a Kaplan turbine is 0.75 MW. The volume flow rate of water in 15 m3/s, whirl velocity at inlet is 12 m/s and blade velocity is 5 m/s. Find the mechanical efficiency (in %)?