Specific speed of a Kaplan turbine is               

Related MCQs

• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
• The velocity of the flow at the inlet of Kaplan turbine is V. In an experimental setup, what could be the possible value of the velocity of the flow at the outlet of Kaplan turbine?
• In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
• The volume flow rate into a Kaplan turbine is Q m3/s. 0.10Q m3/s volume of water do not flow over the runner blades. What further information is required to find the volumetric efficiency (numerical value) of the Kaplan turbine?
• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• Low specific speed, high specific speed and medium specific speed are classified based on
• Specific speed of the turbine is defined as the speed at which the turbine runs when
• The velocity of flow through a Kaplan turbine is 10 m/s. The outer diameter of the runner is 4 m and the hub diameter is 2 m. Find the volume flow rate of the turbine in m3/s?
• The flow ratio of a Kaplan turbine is given as 0.7. The available head is 30 m. The outer diameter of the runner is 3.5 m and the hub diameter is 2 m. Find the volume of water flowing through the turbine per second (m3/s)?
• The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).