The pressure of liquid at throat in a Venturimeter is __________ than that at inlet.

Related MCQs

• In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be
• In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
• The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).
• A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid)
• In which of following turbine inlet whirl velocity and inlet jet velocity are equal in magnitude?
• Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
• The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
• The velocity of the liquid flowing through the divergent portion of a Venturimeter
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is