A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid)

Related MCQs

• The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid)
• When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures.
• The total pressure on the top of a closed cylindrical vessel of radius (r) completely filled up with liquid of specific weight (w) and rotating at (ω) rad/s about its vertical axis, is
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• A glass tube of small diameter (d) is dipped in fluid. The height of rise or fall in the tube given by (where w = Specific weight of liquid, α = Angle of contact of the liquid surface, and σ = Surface tension)
• The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called
• The weight per unit volume of a liquid at a standard temperature and pressure is called
• When time of closure tc = L/v0 (where L is length of pipe and v0 is speed of pressure wave), the portion of pipe length subjected to maximum head is
• A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is