One cubic metre of water weighs

Related MCQs

• A rectangular block 2 m long, 1 m wide and 1 m deep floats in water, the depth of immersion being 0.5 m. If water weighs 10 kN/m3, then the weight of the block is
• A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is
• The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid)
• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice)
• The work done by centrifugal pump on water per second per unit weight of water is given by
• In Pelton is ratio of volume of water actually striking the runner and volume of water supplied to turbine?
• Water flow velocity is given 10 m/s. The runner diameter is 3 m and the width of the wheel is 25 cm. Find the mass of water (kg) flowing across the runner per second.
• Which of the following efficiencies for Francis Turbine is described as the ratio between total quantity of water over runner blades to total quantity of water supplied to turbine?
• The volumetric efficiency of a given turbine is 80%. If volume flow rate of water in given to be 30 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?