[Solved] In shunt and compound motor starting the shunt field should be made on with full starting resistance in

Q.	In shunt and compound motor starting the shunt field should be made on with full starting resistance in
A.	series with field
B.	parallel with field
C.	series with armature
D.	parallel with armature
Answer» C. series with armature
Explanation: in shunt and compound motors starting the shunt field should be switched on with full starting resistance in armature circuit. a short time delay in this position allows the field current to build up to the steady value of the inductive field transients.

1.7k

Do you find this helpful?

View all MCQs in

Electrical Drives and Controls (EDC)

Discussion

No comments yet

Related MCQs

In shunt and compound motor starting the shunt field should be made on with full starting resistance in
For a 7.46 kW, 200 V dc shunt motor with full load efficiency of 85% has armature resistance of 0.25 ohms. Calculate the value of starting resistance in ohms for a current 1.5 times of the full load current.
A starter is required for a 220-V shunt motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?
A 100 hp, 250 V, 350 A shunt dc motor with an armature resistance of 0.05 ohms. To limit maximum starting current to twice the rated of its value, what will be the number of stages of starting resistances?
For a 100 hp 250 V, compound dc motor with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?
full load efficiency of 85% has armature resistance of 0.25 ohms. Calculate the value of starting resistance in ohms for a current 1.5 times of the full load current.
A starting resistance is inserted at the starting in an induction motor as well as dc motor.
The starting resistance of a DC shunt motor is generally
The starting resistance of a DC shunt motor is generally
motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?