A laboratory group was working with a set of 3-hp shunt DC motor. But there was a mistake that it was fused with a 0.3A fuse instead 3A fuse. Then it was started

Related MCQs

• In shunt and compound motor starting the shunt field should be made on with full starting resistance in  
• In shunt and compound motor starting the shunt field should be made on with full starting resistance in                          
• An induction motor when started on load, it does not accelerate up to full speed but runs at 1/7th of the rated speed. The motor is said to be  
• An induction motor when started on load, it does not accelerate up to full speed but runs at 1/7th of the rated speed. The motor is said to be                    
• A starter is required for a 220-V shunt motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?
• A 50 Hz, 4poles, a single phase induction motor is rotating in the clockwise direction at a speed of 1425 rpm. The slip of motor in the direction of rotation & opposite direction of the motor will be respectively.
• The starting resistance of a DC shunt motor is generally  
• A 100 hp, 250 V, 350 A shunt dc motor with an armature resistance of 0.05 ohms. To limit maximum starting current to twice the rated of its value, what will be the number of stages of starting resistances?
• The torque limit of speed for a shunt motor  
• For a 100 hp 250 V, compound dc motor with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?