In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is

Related MCQs

• A dimensionless number which is the ratio of mass heat flow rate to the heat flow rate by conduction under a unit temperature gradient and through a thickness L is known as
• Heat transfer by conduction results due to the transfer of free electrons, kinetic energy & vibrational energy from one molecule to another. Conduction heat transfer cannot take place
• A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time
• Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal to the direction of heat flow.)
• The amount of heat flow through a body by conduction is
• Arithmetic mean area can be used in heat transfer problem to calculate the heat flow by conduction through a cylinder which is
• Which area is used in case of heat flow by conduction through a cylinder?
• In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate.
• In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid.
• When analogy is drawn between heat flow and electricity flow in circuits, the heat flow of thermal circuits is equated in the electrical circuit against