[Solved] with the remaining brushes, voltage and power that could be obtained from the machine are

McqMate

Q.	with the remaining brushes, voltage and power that could be obtained from the machine are
A.	e, p
B.	e, 2p/3
C.	e/p, 2p/3
D.	e, p/3
Answer» A. e, p
Explanation: taking kirchoff’s law into study here, the voltage across the winding will remain same.

1.8k

0

Do you find this helpful?

18

View all MCQs in

Electrical Drives and Controls (EDC)

Discussion

No comments yet

Related MCQs

A 6-pole lap wound DC generator has a developed power of P watts and brush voltage of E volts. Three adjacent brushes of the machine had been found worn out and got open circuited. If the machine is operated with the remaining brushes, voltage and power that could be obtained from the machine are
In the rotor voltage injection method, when an external voltage source is in phase with the main voltage then speed will
In the rotor voltage injection method, when an external voltage source is in opposite phase with the main voltage then speed will
The flux and the internally generated voltage of a dc machine is a function of its magneto-motive force.
an external voltage source is in phase with the main voltage then speed will
A 200V dc machine has 4 poles and 40 coils, having simplex lap winding. The number of commutator segments which required in the given machine will be?
voltage of a dc machine is a function of its magneto-motive force.
with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?
For a 100 hp 250 V, compound dc motor with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?
For a dc machine, its commutator has a diameter of 50 c rotating at 1000 rpm. For a brush width of 1 cm, the time commutation taken by the machine will be