A 6-pole lap wound DC generator has a developed power of P watts and brush voltage of E volts. Three adjacent brushes of the machine had been found worn out and got open circuited. If the machine is operated with the remaining brushes, voltage and power that could be obtained from the machine are                    

Related MCQs

• with the remaining brushes, voltage and power that could be obtained from the machine are  
• With a P-pole DC machine with armature current Ia, the current per brush arm for a lap connected windings is?
• For a dc machine, its commutator has a diameter of 50 c rotating at 1000 rpm. For a brush width of 1 cm, the time commutation taken by the machine will be  
• For a dc machine, its commutator has a diameter of 50 c rotating at 1000 rpm. For a brush width of 1 cm, the time commutation taken by the machine will be                    
• A 200V dc machine has 4 poles and 40 coils, having simplex lap winding. The number of commutator segments which required in the given machine will be?
• While doing regular checks on the dc machine with the lap connected winding, it is reported to have ammeter fluctuations, this can be due to  
• While doing regular checks on the dc machine with the lap connected winding, it is reported to have ammeter fluctuations, this can be due to                    
• In the rotor voltage injection method, when an external voltage source is in phase with the main voltage then speed will                        
• In the rotor voltage injection method, when an external voltage source is in opposite phase with the main voltage then speed will
• The simplex lap winding has the range of winding pitch of