Steam traps are provided in steam carrying pipelines to

Related MCQs

• Which of the following is the most widely used heat insulating material for pipelines carrying steam?
• Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low
• A 10 cm dia steam pipe, carrying steam at 180°C, is covered with an insulation (conductivity = 0.6 W/m.°C). It losses heat to the surroundings at 30°C. Assume a heat transfer co-efficient of 0.8 W/m2 .°C for heat transfer from surface to the surroundings. Neglect wall resistance of the pipe and film resistance of steam. If the insulation thickness is 2 cms, the rate of heat loss from this insulated pipe will be
• Steam traps are used to
• 1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be
• The maximum heat transfer co-efficient from steam heating will be attained when the steam is:
• Temperature of steam at around 540°C can be measured by
• A steam pipe is to be insulated by two insulating materials put over each other. For best results
• In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be
• Steam economy in case of a triple effect evaporator will be