The factor which affects the critical speed of a shaft is

Related MCQs

• The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in
• In a slider crank mechanism, the length of the crank and connecting rod are 180 mm and 540 mm respectively. The crank position is 45° from inner dead centre. The crank shaft speed is 450 r.p.m. (clockwise), calculate angular velocity of the connecting rod in rad/s.
• Critical speed is expressed as
• The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system)
• Which type of board should be installed if the speed limit is 100kmph?
• If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor?
• For the given data of an Internal combustion engine : Mass of parts = 180 kg bore = 175 mm, length of stroke = 200 mm, engine speed = 500 r.p.m., length of connecting rod = 400 mm and crank angle = 60° from T.D.C, find the inertia force.
• For a multicylinder engine, the coefficient of fluctuation of speed would vary with
• For low and moderate speed engines, the cam follower should move with
• For high speed engines, the cam follower should move with