A 500 turns solenoid develops an average induced voltage of 60 V. Over what time interval must a flux change of 0.06 Wb occur to produce such a voltage ?

Related MCQs

• An average voltage of 10 V is induced in a 250 turns solenoid as a result of a change in flux which occurs in 0.5 second. The total flux change is
• What will be the current passing through the ring shaped air cored coil when number of turns is 800 and ampere turns are 3200 ?
• A 200 turn coil has an inductance of 12 mH. If the number of turns is increased to 400 turns, all other quantities (area, length etc.) remaining the same, the inductance will be
• The self-inductance of the coil may be defined as equal to the e.m.f. induced in volts when the current in the circuit changes at the rate of unit weber turns.
• An e.m.f. of 16 volts is induced in a coil of inductance 4H. The rate of change of current must be
• A conductor 2 metres long moves at right angles to a magnetic field of flux density 1 tesla with a velocity of 12.5 m/s. The induced e.m.f. in the conductor will be
• Main causes of noisy solenoid are
• A certain amount of current flows through a ring-shaped coil with fixed number of turns. How does the magnetic induction B varies inside the coil if an iron core is threaded into coil without dimensional change of coil ?
• If current in a conductor increases then according to Lenz's law self-induced voltage will
• A coil is wound on iron core which carries current I. The self-induced voltage in the coil is not affected by