[Solved] According to API, the acceptable particle concentration of wet particle solution for fluorescent particles is:

McqMate

Q.	According to API, the acceptable particle concentration of wet particle solution for fluorescent particles is:
A.	0.1 to 0.4 mL by volume
B.	0.1 to 0.5 mL by volume
C.	0.1 to 0.6 mL by volume
D.	0.1 to 0.7 mL by volume
Answer» A. 0.1 to 0.4 mL by volume

4.3k

0

Do you find this helpful?

21

View all MCQs in

Non Destructive Testing and Evaluation

Discussion

No comments yet

Related MCQs

According to API, the particle concentration of wet particle solution must be checked:
According to ASTM E709-95 and API, when fluorescent particles are used, the UV bulb shall warm up prior to use for at least:
According to ASTM E709-95 when fluorescent particles are used, the UV light intensity shall be above:
According to ASTM E709-95 when fluorescent particles are used, the bulb shall be warmed up prior to use for at least:
According to ASTM E709-95 when applying fluorescent magnetic particles technique, the operator shall be in darkness area at least......................prior to examination:
According to ASTM E709-95 and API, the temperature of the dry particles can be usable up to:
A disadvantage of fluorescent magnetic particles is:
Most fluorescent dyes used for magnetic particle testing fluoresce what colour?
Fluorescent magnetic particle indications should be inspected under
Fluorescent magnetic particle indications should be inspected under