[Solved] The process of loading more than one film into a cassette is known as the technique:

Q.	The process of loading more than one film into a cassette is known as the technique:
A.	Single film technique
B.	Multiple film technique
C.	none
D.	none
Answer» B. Multiple film technique

917

Do you find this helpful?

View all MCQs in

Non Destructive Testing and Evaluation

Discussion

No comments yet

Related MCQs

Lead foil in direct contact with the film in a cassette absorbs:
‘Film contrast’ is the inherent ability of a film to show for a given change in film exposure.
The ‘multi-film’ technique may be used when one radiograph film does not have enough to produce a satisfactory radiograph of a specimen.
The film processing step in which the undeveloped silver bromide is removed from the film emulsion is called:
Use of a slower speed film improves the definition of the radiograph because the slower film:
A radiograph is made using film X with an exposure of 10 mA-min. Film density obtained in the area of interest is 1.0. If it is desired to achieve a density of 2.0 in the area of interest, what exposure is required? (Log relative exposure = 1.1 for a density of 1.0 and 1.62 for a density of 2.0)
A good Cobalt-60 shot is made on a 7.6 cm (3 inches) steel casting using an exposure time of 10 minutes and a source-to-film distance of 91.5 (36 inches). If it is necessary to change the source-to-film distance to 61 cm (24 inches), what exposure time would produce a similar radiograph if all other conditions remain the same?
A radiographic exposure with 3700 GBq (100 Ci) source of Ir-192 using source to film distance of 60 cm results in a radiation intensity of 0.12 Gy/h (11.8 R/h) and a radiographic density of 2.5. The intensity of radiation needed to obtain the same density when the source to film distance is changed to120 cm is:
A 7.6 cm (3 inches) thick test specimen is radiographed with a source having size of 1.3 cm (1/2 inch), the film is placed in contact with the test specimen. The source to film distance is 40.6 cm (16 inches).The geometric unsharpness obtained is:
If an exposure time of 60 seconds and source to film distance of 365.7 m (1200 feet) is necessary for a particular exposure, what exposure time would be needed for an equivalent exposure if the source- to-film distance is changed to 457.2 m (1500 feet)?