The flow in a pipe whose valve is being opened or closed gradually is an example of

Related MCQs

• Flow in a pipe where average flow parameters are considered for analysis is an example of
• The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
• Under which of the following conditions the closure of valve is considered rapid? (where L = length of pipe, C = velocity of pressure wave produced due to water hammer.)
• Gradually varied flow is
• 2𝑔 148. The power transmitted through the pipe is maximum when head lost due to friction in the pipe is equal to
• A U-tube manometer, attached to an air pipe, measures 20 cm of mercury. The pressure, in kPa, in the air pipe is
• The velocity in a 2 cm-diameter pipe is 20 m/s. If the pipe enlarges to 5 cm diameter velocity, in m/s, will be
• A closed cubical box 0.8 m on each side is half filled with water and the other half being filled with oil of specific gravity 0.75. Now if the box is accelerated upwards at the rate of 4.905 m/sec2 the pressure difference in kg/m2 between the top and bottom layers would be
• In case of turbulent flow of a fluid through a circular tube (as compared to the case of laminar flow at the same flow rate) the maximum velocity is ....., shear stress at the wall is ....., and the pressure drop across a given length is ....., the correct words for the blanks are, respectively
• Under which two of the following regimes would the assumption of a continuum be reasonable (1) Free molecule flow (2) Gas dynamics (3) Slip flow (4) Complete vacuum (5) Liquid flow