If all the SCR’s of 3 phase PAC is replaced by diodes, they would be triggered

Related MCQs

• The single phase mid-point type cycloconverter uses __________ number of SCRs.
• The single phase bridge type cycloconverter uses __________ number of SCRs.
• A single-phase half-wave thyristor circuit with R load is triggered at an angle of α = 0°. As such, the maximum value of the average output voltage would be given by Consider Vs = Vm sinωt.
• For dynamic equalizing circuit used for series connected SCRs, the choice of C is based on:
• Practical way of obtaining static voltage equalization in series connected SCRs is by the use of:
• Which of these triggering methods for series connected SCRs use LASCR in the gate circuit?
• A 3 kV circuit uses SCR of 800 V rating. If derating is 25%, the number of SCRs in series is
• An SCR is triggered at 40° in the positive half cycle only. The average anode current is 50 A. If the firing angle is changed to 80°, the average anode current is likely to be
• In the method of phase control, the phase relationship between ___ & ___ is controlled by varying the firing angle
• In a phase controlled 3 phase ac voltage controller, the harmonic present is