A uniformly-loaded D.C. distributor is fed at both ends with equal voltages. As compared to a similar distributor fed at one end only, the drop at the middle point is

Related MCQs

• As compared to a 2-wire D.C. distributor, a 3-wire distributor with same maximum voltage to earth uses only
• In a D.C. 3-wire distributor using balancers and having unequal loads on the two sides
• Pin type insulators are generally not used for voltages beyond
• The voltage drop, for constant voltage transmission is compensated by installing
• For aluminium, as compared to copper, all the following factors have higher values except
• When a conductor carries more current on the surface as compared to core, it is due to
• The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the
• If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as
• The spacing between phase conductors of a 220 kV line is approximately equal to