In a D.C. 3-wire distributor using balancers and having unequal loads on the two sides

Related MCQs

• A uniformly-loaded D.C. distributor is fed at both ends with equal voltages. As compared to a similar distributor fed at one end only, the drop at the middle point is
• As compared to a 2-wire D.C. distributor, a 3-wire distributor with same maximum voltage to earth uses only
• The loads on distributors systems are generally
• The power factor of industrial loads is generally
• A conductor, due to sag between two supports, takes the form of
• When the interconnector between two stations has large reactance
• The angular displacement between two interconnected stations is mainly due to
• If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as
• Which of the following materials is not used for transmission and distribution of electrical power ?
• The square root of the ratio of line impedance and shunt admittance is called the