a steel specimen is subjected to a stress of 300 Mpa. If E = 200 Gpa, modulus of resilience is                  

Related MCQs

• an aluminium specimen is subjected to a stress of 160 /mm2 and corressponding modulus of resilience is 0.128 Mpa. Youngs modulus for aluminium is             
• a steel specimen during the test subjected to a stress of 300 N/mm2 and strain 1.5 x 10-3. the modulus of elasticity of steel is
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• if total amount of energy absorbed by a steel specimen is 5 N-m for a volume of 10 x 10-3 mm3, the modulus of toughness is                       N/mm2
• the resolved shear stress of a unit cell in nickel is N/mm2 if a tensile stress of 13.7 Mpa is applied. Take angle between the axial force and slip direction is 450 and angle between axial force and normal to slip is 540
• if engineering stress for a material is 250 Mpa and engineering strain is 0.2 , then true stress is                  
• modulus of resilience is                  
• modulus of resilience is given as                  
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• A 40 cm long rod of diameter 0.5 cm is loaded with 5 kN weight. The engineering stress in the rod is Mpa