McqMate
Sign In
Hamberger menu
McqMate
Sign in
Sign up
Home
Forum
Search
Ask a Question
Sign In
McqMate Copyright © 2025
→
Civil Engineering
→
Geotechnical Engineering
→
'Loess' is silty clay formed by the acti...
Q.
'Loess' is silty clay formed by the action of
A.
Water
B.
Glacier
C.
Wind
D.
Gravitational force
Answer» C. Wind
3k
0
Do you find this helpful?
21
View all MCQs in
Geotechnical Engineering
Discussion
No comments yet
Login to comment
Related MCQs
A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is
A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m² to 200 kN/m². If the effective stress is further increased from 200 kN/m² to 400 kN/m², then the settlement of the same clay is
A clay subjected to pressure in excess to its present over-burden, is said to be
For testing a saturated clay for shear strength, the test recommended, is
The clay mineral with the largest swelling and shrinkage characteristics is
A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required
Within the consolidation process of a saturated clay
The admixture of coarser particles like sand or silt to clay causes
The shear strength in plastic undrained clay, is due to
In a deposit of normally consolidated clay