If a point in a strained material is subjected to equal normal and tangential stresses, then the angle of obliquity is

Related MCQs

• At a point in a strained body carrying two unequal unlike principal stresses pi and p2 (Pi > P2X the maximum shear stress is given by
• A body is subjected to two normal stresses of 200 kN/m2 (tensile) and 100 kN/m2 (compressive) acting mutually perpendicular to each other. The maximum sher stress is equal to
• When a body is subjected to a direct tensile stress (?) in one plane, then normal stress on an oblique section of the body inclined at an angle ? to the normal of the section is
• A circular section of steel 20 mm diameter is subjected to an axial force of 100 kg. The components of force normal and tangential to a plane inclined to the axis of bar will be
• In the case of biaxial state of normal stresses, the normal stress on 45? plane is equal to
• A body is subjected to two normal stresses 20 kN / m2 (tensile) and 10 kN / m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• A piece of steel plate is subjected to perpendicular stresses of 50 Mpa and 30 Mpa both tensile. The normal stress is
• When a body is subjected to three mutually perpendicular stresses, of equal intensity, the ratio of direct stress to the corresponding volumetric strain is known as
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.