Slenderness ratio of a 5 m long column hinged at both ends and having a circular crosssection with diameter 160 mm is

Related MCQs

• Euler's formula for a mild steel long column hinged at both ends is not valid for slenderness ratio
• The equivalent length, of a given column with given end conditions, is the length of an equivalent column of the same material and cross-section with hinged ends, and having the value of crippling load equal to that of the given column.
• According to Euler's column theory, the crippling load of a column is given by P = ?2 EI / Cl2. In this equation, the value of C for a column with both ends hinged, is
• Two shafts are made of mild steel one having circular cross-section and the other shaft is hollow circular with inner diameter half of the outer diameter. The ratio of the torque that can be transmitted in two cases will be
• The ratio of central deflection in a beam freely supported at both ends to that when the beam is fixed at both ends and subjected to a central load W in both the cases would be
• The Rankine's constant for a mild steel column with both ends hinged is
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is
• An axial hoad is applied on a circular section of diameter D. If the same load is applied on hollow circular section with inner diameter D/2, the ratio of stress in two cases would be
• An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
• A brittle steel rod is heated to 160?C and then suddenly clamped at both ends. It is then allowed to cool and breaks at a temperature of 85?C. If E = 200 GN/m2 and ? = 12 x 10-5 / ?C, the breaking stress of steel is