The ratio of central deflection in a beam freely supported at both ends to that when the beam is fixed at both ends and subjected to a central load W in both the cases would be

Related MCQs

• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
• A simply supported beam 'A' of length l, breadth b and depth d carries a central load W. Another beam 'B' of the same dimensions carries a central load equal to 2 W. The deflection of beam 'B' will be
• A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to
• A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be
• A simply supported beam 'A' of length l, breadth b and depth d carried a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is
• A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
• A rectangular beam of length l supported at its two ends carries a central point load W. The maximum deflection occurs
• The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
• A cantilever beam rectangular in cross-section is subjected to a load W at its free end, causing deflection ?1. If the load is increased to 2W, causing deflwction ?2, the value of ?1/?1 would be