If the depth of a beam of rectangular section is reduced to half, strain energy stored in the beam becomes

Related MCQs

• A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to
• A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
• A rectangular block of size 200 mm x 100 mm x 50 mm is subjected to a shear stress of 100 N/mm2. If modulus of rigidity of material is 1 x 105 N/mm2, strain energy stored will be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
• The rectrangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam B will be
• The rectrangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be
• A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be
• A simply supported beam 'A' of length l, breadth b and depth d carried a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
• The rectrangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam B will be
• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is