Which of the following parameters remains constant during chemical dehumidification?

Related MCQs

• During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains constant.
• Which of the following parameters remains almost constant during adiabatic saturation of unsaturated air?
• Which of the following remains constant during evaporative cooling process with recirculated water supply?
• Which of the following remains constant during sensible cooling process?
• A 25 cm × 25 cm × 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m × 1m × 1cm flat sheet of the same material is to be dried from one side only. Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is
• Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant
• At equilibrium the concentration of water in vapour phase (C*) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is
• With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible.
• During the constant rate period of drying of a solid,
• During constant rate period, the rate of drying decreases with the