__________ extractor is used for the concentration of radioactive nuclear waste.

Related MCQs

• Radioactive nuclear waste is treated in
• __________ extractor uses centrifugal force for separating the two phases.
• Bollman extractor
• In a counter-current liquid extractor
• In a counter-current extractor, as the axial mixing increases, the extraction efficiency
• The equipment used in the extraction of highly corrosive radioactive liquids is
• Which of the following is used for the concentration of rubber latex?
• An alkaline solution is used to reduce the concentration of carbon dioxide in a stream from 10% to 0.1% by absorption with irreversible chemical reaction. The overall number of transfer units based on gas phase is:
• H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is
• The velocity, concentration and temperature boundary, for the boundary layer development on a flat plate during connective mass transfer will be same, if