The modulus of elasticity for mild steel is approximately equal to

Related MCQs

• The modulus of elasticity for mild steel is approximately equal to
• Two materials are having modulus of elasticity, modulus of rigidities and bulk modulus as (E1, E2), (C1, C2), and (K1, K2). The modulus ratio is given by
• If, for a given material, the modulus of elasticity is equal to twice its modulus of rigidity (G), then the bulk modulus is
• A material has modulus of rigidity equal to 0.4x105 N/mm2 and Bulk modulus equal to 0.95 x105 N/mm2 The Young’s modulus value in GPa is..
• The modulus of elasticity in terms of bulk modulus and modulus of rigidity is given by
• A mild steel flat 3 m long 150 mm wide and 15 mm thick carries an axial tensile load of 150 kN. If the value of u for mild steel is 0.3, it can be concluded that
• If Young's modulus of elasticity is determined for mild steel in tension and compression, the two values will have a ratio (Et/Er) of
• The relation between E (modulus of elasticity) and K (bulk modulus of elasticity) is given by
• If the modulus of elasticity of a material is twice its modulus of rigidity, then the Poisson's ratio of the material is equal to zero.
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.