Engineering stress strain curve and true stress strain curve are equal up to

Related MCQs

• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• Under uniaxial strain, the ratio of maximum shearing strain to uniaxial strain is
• In a tensile test conducted on a ductile material, the ratio of the true stress to the engineering stress, is approximately
• Shape of true stress strain curve of material depends upon
• When two shafts of same length, one of which is hollow, transmit equal torques and have equal maximum stress, then they should have equal
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• A solid cube is subjected to equal normal forces of the same type on all its faces. The ratio volumetric strain/liner strain in any of the three xes will be
• If the magnitude of direct stress and bending stress is equal, then there will be zero stress at one of the extreme ends of a column.
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be