Shape of true stress strain curve of material depends upon

Related MCQs

• Engineering stress strain curve and true stress strain curve are equal up to
• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• Under uniaxial strain, the ratio of maximum shearing strain to uniaxial strain is
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• The stress strain curve for a glass rod during tensile test would exhibit
• In a tensile test conducted on a ductile material, the ratio of the true stress to the engineering stress, is approximately
• When the material is loaded with elastic limit , then the stress is ……. to strain.
• A rectangular block of size 200 mm x 100 mm x 50 mm is subjected to a shear stress of 100 N/mm2. If modulus of rigidity of material is 1 x 105 N/mm2, strain energy stored will be