In a tensile test conducted on a ductile material, the ratio of the true stress to the engineering stress, is approximately

Related MCQs

• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A tensile test is performed on a round bar. After fracture it has been found that the diameter remains approximately same at fracture. The material under test was
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• In a tensile test, when the material is stressed beyond elastic limit, the tensile strain
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• The tensile strength of ductile materials is
• If percentage reduction in area of a certain specimen made of material 'A' under tensile test is 60% and the percentage reduction in area of a specimen with same dimensions made of material 'B' is 40%, then
• In a tensile test of specimen,the ratio of maximum load to the original cross sectional area of test piece is called