In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the

Related MCQs

• In a simple bending theory, one of the assumption is that the plane sections before bending remain plane after bending. This assumption means that.
• In the simple bending theory one of the assumptions usually made is that the plane sections before bending remain plane after bending. This assumption implies that
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• The assumption, generally, made in the theory of simple bending is that
• A prismatic beam fixed at both ends carries a uniformly distributed load. The ratio of bending moment at the supports to the bending moment at mid-span is
• A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end. The value of x such that the greatest bending moment in the beam is as small as possible, will be
• For an isotropic, homogeneous and elastic material obeying Hooke's law, number of independent elastic constants is
• For an isotropic, homogeneous and elastic material, which obeys Hooke's law, the number of independent elastic constants is
• In a simple bending of beams, the stress in the beam varies