When a rectangular beam is loaded transversely, the maximum tensile stress is developed on the

Related MCQs

• When a rectangular beam is loaded transversely, the zero stress is developed on the neutral axis.
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is
• A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
• On one side of a neutral axis of a beam, there is a tensile stress and on the other side of the beam there is a compressive stress
• When a rectangular beam is loaded longitudinally, shear stress develops on
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is