For long columns, the value of buckling load is

Related MCQs

• Buckling load for a given column depends upon
• The buckling load for a given column depends upon
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A uniformly distributed load may be assumed to behave like a point load at the centre of gravity of the load for all sorts of calculations.
• If a column fails due to buckling, it is likely to be a
• A mild steel flat 3 m long 150 mm wide and 15 mm thick carries an axial tensile load of 150 kN. If the value of u for mild steel is 0.3, it can be concluded that
• When both ends of a column are fixed, the crippling load is P. If one end of the column is made free, the value of crippling load will be changed to
• A cantilever beam rectangular in cross-section is subjected to a load W at its free end, causing deflection ?1. If the load is increased to 2W, causing deflwction ?2, the value of ?1/?1 would be
• A long column has maximum crippling load when its
• A load of 10,000 kg is applied to copper cylinder 20 cm long and 5 cm in diameter causes the length to increase by 4 mm and diameter to decrease by 0.4 mm. The Poisson's ratio for copper would be