In order to prevent crushing of masonry at the base of the dam, the maximum stress should be

Related MCQs

• In order to avoid sliding of masonry dam, the force of friction between the dam and soil should be at least
• With a punch for which the maximum crushing stress is 4 times the maximum shearing stress of the plate, the biggest hole that can be punched in the plate would be of diameter equal to
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• A body is subjected to a direct tensile stress of 300 Mpa in one plane accompanied by a simple shear stress of 200 Mpa. The maximum normal stress will be
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• In case of thin walled cylinders the ratio of hoop stress to maximum shear stress stress is
• A masonry dam may fail due to
• A masonry dam is liable to fail