The maximum efficiency of a scres jack having square threads and friction angle of 30 degree will be

Related MCQs

• A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be
• Efficiency of a screw jack in maximum when its 31 helix angle, ? is
• A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg
• A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be
• A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be
• The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be
• A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range
• A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is
• If the angle of friction is zero a body will experience
• The angle of friction is