In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals.

Related MCQs

• A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is
• A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have
• A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have
• What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs.
• A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is
• A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be
• A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is
• A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is
• A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was
• The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is