A sequential circuit outputs a ONE when an even number (> 0) of one's are input; otherwise the output is ZERO. The minimum number of states required is

Related Questions

• THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT                   GATE
• which of the following rules states that if one input of an AND gate is always 1, the output is equal to the other input?
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• The output of a sequential circuit depends on
• For the device shown here, assume the D input is LOW, both S inputs are HIGH, and the input is HIGH. What is the status of the outputs?
• Advantage of synchronous sequential circuits over asynchronous ones is
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active- low outputs is 1110. As a result, output line 7 is driven LOW.
• What is the minimum number of two-input NAND gates used to perform the function of two input OR gate ?