When a fluid flows through a tapering pipe at a constantly increasing rate, the flow is said to

Related MCQs

• In case of turbulent flow of a fluid through a circular tube (as compared to the case of laminar flow at the same flow rate) the maximum velocity is ....., shear stress at the wall is ....., and the pressure drop across a given length is ....., the correct words for the blanks are, respectively
• Water flows through a 2 cm dia. Pipe at 20 m/s. It then flows radially outward between two discs, 2 mm apart. When it reaches a radius of 40 cm its velocity, in m/s will be
• When the rheogram for a fluid at any temperature and pressure is a straight line passing through origin, the fluid is said to be
• In case the adhesion between moleules of a fluid is greater than cohesion between fluid and the glass, then the free level of the fluid in glass tube dipped in the glass vessel will be
• The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
• A body with a rounded nose and along tapering tail is usually best suited for
• The flow of a fluid in a pipe takes place from
• 2𝑔 148. The power transmitted through the pipe is maximum when head lost due to friction in the pipe is equal to
• Flow in a pipe where average flow parameters are considered for analysis is an example of
• What flow rate in m3/s, is needed using a 20 : 1 scale model of a dam over which 4m3/s of water flows?