The flow of a fluid in a pipe takes place from

Related MCQs

• In case the adhesion between moleules of a fluid is greater than cohesion between fluid and the glass, then the free level of the fluid in glass tube dipped in the glass vessel will be
• In case of turbulent flow of a fluid through a circular tube (as compared to the case of laminar flow at the same flow rate) the maximum velocity is ....., shear stress at the wall is ....., and the pressure drop across a given length is ....., the correct words for the blanks are, respectively
• The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
• When a fluid flows through a tapering pipe at a constantly increasing rate, the flow is said to
• Flow in a pipe where average flow parameters are considered for analysis is an example of
• ...... is important in compressible fluid flow problems at high velocities, such as high velocity flow in pipes or motion of high-speed projectiles and missiles.
• A type of flow in which the fluid particles while moving in the direction of flow rotate about their mass centre, is known as
• 2𝑔 148. The power transmitted through the pipe is maximum when head lost due to friction in the pipe is equal to
• A U-tube manometer, attached to an air pipe, measures 20 cm of mercury. The pressure, in kPa, in the air pipe is
• The velocity in a 2 cm-diameter pipe is 20 m/s. If the pipe enlarges to 5 cm diameter velocity, in m/s, will be