In Buttress dam the column or slenderness ratio is usually maintained between

Related MCQs

• In a Buttress dam, when the height of dam is 10 m to 25 m, the spacing of buttress is usually restricted to
• Which one of the following is not usually considered particular advantage of a Buttress dam?
• In a Buttress dam the inclination of the deck with horizontal is kept between
• In Buttress dam, too flat a slope causes
• Which one of the following is not a disadvantage due to a Buttress dam?
• In case of Buttress dams, too steep slopes
• In case the resultant of all the forces acting on a dam passes outside the base, the dam would overturn unless
• For safety against overturning in a gravity dam, the resultant of all the forces acting on a dam must pass
• The stress in the dam should be within the specified limits for the body of dam in the foundations. If the stress at the toe and heel are excessive, they can be brought within permissible limits by
• The side of the dam to which the water from the river or the stream approaches is known as